Intelligent sawing and Milling Complex Machining Center KMM-S530

Equipment features: specialized in aluminum profile cutting, double-sided milling and double-sided laser engraving line, set drilling milling + laser + cutting integration of flexible processing, to meet different processing needs, to achieve simultaneous production, multi-step processes, one machine complete, save time, reduce cost, efficiency. Frame material: one machine can complete pin hole, glue injection hole, mulch line, invisible drainage hole, floor drain drainage hole; fan material: one machine can complete pin hole, glue injection hole, lock box hole, angle protection, transmission rod gap. All process holes of the four main materials can be machined. The rear side is equipped with laser cutting device, the power can be automatically adjusted with the section wall thickness, cutting quality is good. According to the process requirements automatically switch the marking or cutting state and marking or cutting. The front side is equipped with special laser engraving machine, which can make laser engraving on both sides at the same time, with accurate positioning and high efficiency. No skilled workers, no need to consider the section, no need to custom-made rely on the mold, no need to consider the height of the profile. An ordinary worker can operate, put 8 profiles at a time, automatically complete feeding, cutting, discharging. The per-capita production capacity is increased to 50-80 m2/day (8 hours) , and the per-capita efficiency is increased by more than 3 times, which saves 3-6 people compared with the traditional processing. Feeding system full servo control, intelligent identification profile data (height, wall thickness) , intelligent adjustment of processing parameters (feed speed, feed position) , equipment with error-proofing mechanism. Scanning that processing, cloud data transmission. Connect with ERP software such as sungar, Klaes, Portal Cloud, Phil Dowd, etc. . Equipped with automatic scraping machine (material head) , automatic dust collection device (aluminum scraps) , reduce cleaning frequency, improve working efficiency. Cutting bin double protection, Low Noise, safety, environmental protection. Equipped with multi-directional surveillance cameras.

Safety: Electrical and pneumatic protection device, mechanical protection device, to ensure safe production. Standard tool life management system, saw blade grinding, replacement of automatic tips. Standard automatic maintenance prompt function, eliminate hidden trouble in advance, improve the use of equipment. Standard capacity statistics, equipment status statistics, real-time monitoring, delivery time can be controlled, reduce inventory, improve the utilization of capital flow. With remote service function (maintenance, maintenance, training) , save service time, reduce downtime, reduce factory dependence on skilled workers.

Project Technical Parameters Remarks
Saw cutting length of 100mm-6000mm
Saw cutting width/height 150mm * 150mm
Saw blade size 4.8 * 30 * 600 * 144T
Sawing angles -90 °, 0 °,+90 °
Cutting speed 0-20r/min
Feeding speed 0-110r/min
Discharge speed 0-40r/min
Power supply 380V 50HZ
Machine power 35.65kw
Main spindle power 4KW
Spindle speed 2800r/min
Quantity of feeding and discharging 8 pieces
Working pressure/laser high-pressure pressure 0.65-0.8MPa/1.2-1.4MPa
Sawing accuracy ± 0.15mm
Milling chips/laser accuracy ± 0.15mm
Main spindle motor brand Shenyi/Jintaihui
Guide rail brand Yadeke
Gearbox brand Newell
Servo motor brand Weichuang
Pneumatic component brand Yadeke
Low voltage electrical Schneider
Laser head, laser family, Chuangxin
Laser power 1.5KW
Lubricating oil setting automatic lubrication
External dimensions of the host: length * width * height 16500mm * 4000mm * 3000mm
Weight 13.3T